Free DIY Furniture Plans to Build a West Elm Inspired Offset Bench | Home & Garden

Designs by Studio C

Offset Bench

Project Details

Free DIY Furniture Plans to Build a West Elm Inspired Offset Bench

Estimated Cost

$50-$75

Dimensions Tools

• Tape Measure
• Saw – Jig, Circular, or Miter
• Drill
• Square
• Sander
• Kreg Jig
• Brad Nailer

Lumber

• 1 – 2x2 at 6’
• 1 – 1x2 at 8’
• 1 – 1x3 at 8’
• 1 – 1x8 at 8’
• One sheet of ¾” plywood

Materials

• 1-1/4” pocket hole screws
• 1-1/4” brad nails
• Edge banding for plywood
• One set of 14” drawer slides
• Drawer pull
• 4” foam
• Upholstery batting
• Upholstery fabric
• Wood filler
• Sandpaper
• Wood glue
• Finishing Supplies

Cut List

• 2 – 2x2 at 13-1/4” – Left Legs (Shorter)
• 3 – 1x2 at 12”- Left & Right Frames, Right Slide Support
• 1 – 1x3 at 12” – Left Frame
• 2 – 2x2 at 17-1/4” – Right Legs (Longer)
• 1 – 1x8 (ripped to 6-1/2” wide) at 12” – Right Frame
• 1 – 1x8 (ripped to 6-1/2” wide) at 46-3/4” – Upper Back Stretcher
• 1 – 1x2 at 46-3/4” – Lower Back Stretcher
• 1 – 1x3 at 46-3/4” – Front Apron
• 1 – 1x8 (ripped to 6-1/2” wide) at 14-1/4” – Bench Divider
• 1 – 1x2 at 13-1/4” – Seat Support
• 2 – 1x3 at 13-1/2” – Seat Supports
• 1 – ¾” plywood at 15” x 17-1/4” – Top
• 1 – ¾” plywood at 15” x 32-1/2” – Seat
• 1 – ¾” plywood at 12-1/2” x 13-1/4” – Drawer Bottom
• 2 – ¾” plywood at 5” x 13-1/4” – Drawer Sides
• 1 – ¾” plywood at 5” x 14” – Drawer Back
• 1 – ¾” plywood at 5” x 14-3/4” – Drawer Front

Instructions