Free DIY Furniture Plans to Build Pottery Barn Inspired Modular Bar Components – Grid Base | Home & Garden

Designs by Studio C

Modular Bar Components - Grid Base

Project Details

Free DIY Furniture Plans to Build Pottery Barn Inspired Modular Bar Components – Grid Base

Estimated Cost

$50-$75

Dimensions Tools

• Tape Measure
• Saw – Jig, Circular, or Miter
• Drill
• Countersink Bit
• Square
• Sander
• Kreg Jig 

Lumber

• One full sheet of ¾” plywood
• One full sheet of ½” plywood
• Piece of 3-1/2” trim at 18”

Materials

• 1-1/4” pocket hole screws
• 1” screws
• Edge banding for the plywood, optional
• One set of 10” drawer slides
• 2 – drawer pulls
• 2 – 1” x 1” x 1/8” angle at 11”
• Wood filler
• Sandpaper
• Wood glue
• Finishing Supplies

Cut List

• 4 – ¾” plywood at 2-1/2” x 35-1/4” – Side Frames
• 4 – ¾” plywood at 2-1/2” x 7-3/4” – Side Frames
• 2 – ½” plywood at 7-3/4” x 29-1/4” – Side Panels
• 1 – ¾” plywood at 16-1/2” x 35-1/4” – Back
• 1 – ¾” plywood at 3” x 16-1/2” – Kick Plate
• 1 – ¾” plywood at 1-1/2” x 16-1/2” – Stretcher
• 2 – ¾” plywood at 12” x 16-1/2” – Upper Shelf & Bottom
• 1 – ¾” plywood at 13-3/4” x 18” – Top
• 1 – ¾” plywood at 10-1/2” x 14”- Drawer Bottom
• 2 – ¾” plywood at 2-1/2” x 10-1/2” – Drawer Sides
• 1 – ¾” plywood at 2-1/2” x 15-1/2” – Drawer Back
• 1 – ¾” plywood at 3-15/16” x 16-1/4” – Drawer Front
• 1 – ¾” plywood at 12” x 16-1/4” – Pullout
• 1 – 3-1/2” piece of trim at 18” - Trim
• 3 – ½” plywood at 12” x 25” – Grid
• 5 – ½” plywood at 12” x 16-1/2” – Grid

Instructions